|
COURAGE by Chris Covell [web]
[nfo]
|
||||||||
|---|---|---|---|---|---|---|---|---|
|
|
|||||||
|
popularity : 60% |
|||||||
alltime top: #7593 |
|
|||||||
|
||||||||
added on the 2013-04-06 07:21:27 by ccovell  |
||||||||
popularity helper
comments
Haven't been able to look at it yet, but a diskmag for PC Engine in 2013 - that's incredibly cool. :-)
added on the 2013-04-06 09:59:57 by Radiant 
ditto
Anything new for the PCE is welcome. Great job, and a diskmag, no less! Two thumbs and two toes up.
Amazingly obscure!
Nice Terra Cresta cover and intro graphics.
I'll have to try this on my TG16 later as I've only ran it emulated so far.
I'll have to try this on my TG16 later as I've only ran it emulated so far.
for teh idea :) .. btw how to run it?
Oh yeah. Ran it in an emulator... very sophisticated SID emulation!
Video: http://www.youtube.com/watch?v=vof2Z8Vf3bk
The video doesn't really do it justice since the music playback is timed against a 60 Hz VBI, and I captured the video from a european (50 Hz) console, so it plays too slow in the video.
The video doesn't really do it justice since the music playback is timed against a 60 Hz VBI, and I captured the video from a european (50 Hz) console, so it plays too slow in the video.
Can be easily viewed using an emulator, although the one I used apparently skipped the leftmost part of the display (roughly corresponding to the first letter of each line).
Nice idea. I love diskmags, so I am happy to see a new one, and that alone is reason enough for a thumb up.
Nice idea. I love diskmags, so I am happy to see a new one, and that alone is reason enough for a thumb up.
Coloooors! And platform.
Wooo, nice idea, cool intro, and your bitplane rasters look gorgeous ! \0/
How to run it: 1) in an emulator, 2) with a PCE flashcard, 3) Burn the included CUE/ISO onto a CD and use a PCE-CD-ROM unit.
Screen dimensions can be fully adjusted, as the first article in the demo explains, to cater to dumb emus and TVs. ;-)
Mic: Hard to believe you used a European TG-16, as those things are rare! :-D Anyway, to run the music at normal speed on a PAL system, hack address 0x5AA3 in the ROM from $03 to $00.
Thanks for the comments!
Screen dimensions can be fully adjusted, as the first article in the demo explains, to cater to dumb emus and TVs. ;-)
Mic: Hard to believe you used a European TG-16, as those things are rare! :-D Anyway, to run the music at normal speed on a PAL system, hack address 0x5AA3 in the ROM from $03 to $00.
Thanks for the comments!
@ccovell: I guess they were sold in much lower volume than the PC-E or CoreGrafx, but european TG16s are surprisingly easy to find these days. They're still sold online (boxed and unused, mind you) for ~$100.
I actually had a really hard time getting the ROM to run on my TG16. It would often crash either at startup (I could sometimes see the resolution switch and then it would hang) or later on while running. Dunno if that's related to my flash card or if it's something about this ROM.
Thanks for the speed hack tip, I was wondering about that but felt to lazy to trace it in a debugger.
I actually had a really hard time getting the ROM to run on my TG16. It would often crash either at startup (I could sometimes see the resolution switch and then it would hang) or later on while running. Dunno if that's related to my flash card or if it's something about this ROM.
Thanks for the speed hack tip, I was wondering about that but felt to lazy to trace it in a debugger.
Mic: I hope the problems you were having aren't related to the Neo PCE. I think it's safe to assume that's what you're using.
For the longest time I wasn't able to use the Neo2 manager, because it didn't handle PCE files properly, hence the problems with sprites in SF II, random crashes, etc. I thought that was fixed, though, so I'll keep my fingers crossed and hope it's your 50Hz TG'a fault!
For the longest time I wasn't able to use the Neo2 manager, because it didn't handle PCE files properly, hence the problems with sprites in SF II, random crashes, etc. I thought that was fixed, though, so I'll keep my fingers crossed and hope it's your 50Hz TG'a fault!
platform thumb! and shiny coder's colors I love!
fab stuff <3
elite.
fantastic!
Finally hooked up my TG16 to test this out on a real thing. Unfortunately, the composite cable for the booster is the only one I have, so the picture quality could be better, but luckily, TG16's composite signal is pretty good compared to some other platforms.
It's a good thing you can change both background and text colors. White on black gives the best results, while any combination of red and blue flickers like crazy.
My TV was able to display the whole picture, and I didn't play around with the text adjustment under an emulator, but I did some adjusting now, and this was the first time I saw all the stuff at the bottom of the screen [the little platformer thingy]. I've seen the "Push a button already" before. Nice. I like discovering these small additions.
I made a video as well, running at 60Hz. It was captured using a DVD recorder via composite. The picture is actually a lot clearer when I watch it from a file than it is on the TV screen. Less flicker. I've uploaded it to YouTube. Their conversion screwed things up a bit. The video is darker, and the text is barely readable, unless it's white / yellow on black, but the original VOB was 430+ megs, and the 480p YouTube video is almost exactly a tenth of that size. Here's the link if anyone wants to check it out:
[url=Finally hooked up my TG16 to test this out on a real thing. Unfortunately, the composite cable for the booster is the only one I have, so the picture quality could be better, but luckily, TG16's composite signal is pretty good compared to some other platforms.
It's a good thing you can change both background and text colors. White on black gives the best results, while any combination of red and blue flickers like crazy.
My TV was able to display the whole picture, and I didn't play around with the text adjustment under an emulator, but I did some adjusting now, and this was the first time I saw all the stuff at the bottom of the screen [the little platformer thingy]. I've seen the "Push a button already" before. Nice. I like discovering these small additions.
I made a video as well, running at 60Hz. It was captured using a DVD recorder via composite. The picture is actually a lot clearer when I watch it from a file than it is on the TV screen. Less flicker. I've uploaded it to YouTube. Their conversion screwed things up a bit. The video is darker, and the text is barely readable, unless it's white / yellow on black, but the original VOB was 430+ megs, and the 480p YouTube video is almost exactly a tenth of that size. Here's the link if anyone wants to check it out:
Courage - 60Hz Video
It's a good thing you can change both background and text colors. White on black gives the best results, while any combination of red and blue flickers like crazy.
My TV was able to display the whole picture, and I didn't play around with the text adjustment under an emulator, but I did some adjusting now, and this was the first time I saw all the stuff at the bottom of the screen [the little platformer thingy]. I've seen the "Push a button already" before. Nice. I like discovering these small additions.
I made a video as well, running at 60Hz. It was captured using a DVD recorder via composite. The picture is actually a lot clearer when I watch it from a file than it is on the TV screen. Less flicker. I've uploaded it to YouTube. Their conversion screwed things up a bit. The video is darker, and the text is barely readable, unless it's white / yellow on black, but the original VOB was 430+ megs, and the 480p YouTube video is almost exactly a tenth of that size. Here's the link if anyone wants to check it out:
[url=Finally hooked up my TG16 to test this out on a real thing. Unfortunately, the composite cable for the booster is the only one I have, so the picture quality could be better, but luckily, TG16's composite signal is pretty good compared to some other platforms.
It's a good thing you can change both background and text colors. White on black gives the best results, while any combination of red and blue flickers like crazy.
My TV was able to display the whole picture, and I didn't play around with the text adjustment under an emulator, but I did some adjusting now, and this was the first time I saw all the stuff at the bottom of the screen [the little platformer thingy]. I've seen the "Push a button already" before. Nice. I like discovering these small additions.
I made a video as well, running at 60Hz. It was captured using a DVD recorder via composite. The picture is actually a lot clearer when I watch it from a file than it is on the TV screen. Less flicker. I've uploaded it to YouTube. Their conversion screwed things up a bit. The video is darker, and the text is barely readable, unless it's white / yellow on black, but the original VOB was 430+ megs, and the 480p YouTube video is almost exactly a tenth of that size. Here's the link if anyone wants to check it out:
Courage - 60Hz Video
Very cool!!
Hey Chris glad to see you're still active. You were a real pioneer back in the day with the NES (and PCE) homebrew stuff.
Awesome release too!
Awesome release too!
Awesomeness!
I read it, I love it.
Thumbs up for the intro, the (much needed) color adjustment feature and the hidden(?) little game map thingy at the bottom, which is a nice touch and adds to the somewhat experimental look & feel.
submit changes
if this prod is a fake, some info is false or the download link is broken,
do not post about it in the comments, it will get lost.
instead, click here !